Guide · Connecticut
Why Square Footage Never Matches in Connecticut (GLA Explained)
Here is the short answer to a question we hear constantly in Fairfield County: your Greenwich house can be 4,200 square feet and 3,600 square feet at the same time, and both numbers can be right. The square footage discrepancy in Connecticut that unsettles so many buyers and homeowners is almost never a mistake — it is the predictable result of different parties measuring to different standards. Once you know which standard produced which number, the confusion disappears.

Gross living area is the number that trips people up
Most real estate square footage in Connecticut is quoted as gross living area, or GLA. Appraisers measure GLA to a widely used national standard (ANSI Z765), and that standard has firm rules: it counts finished, above-grade, heated space measured to the exterior of the walls. Two of those words do most of the damage.
“Above-grade” means a finished lower level usually does not count toward GLA, no matter how beautifully it is built. A walk-out media room in a New Canaan colonial can add hundreds of usable square feet that the appraisal reports separately, or not at all. “To the exterior of the walls” means GLA is a gross figure — it includes the thickness of every wall, so it will always exceed the space you could actually carpet. A homeowner who measures the interior with a tape will reliably come up short of the GLA and assume someone rounded up. Nobody did; they measured to a different line.
Where the other numbers come from
The town field card is its own source of drift. Assessors work from the last recorded information, and a finished attic, a converted garage, or an addition permitted a decade ago may never have been reflected. So the card, the listing, the appraisal, and your own tape measure can produce four figures that never quite line up — each internally consistent, none agreeing with the others.
An older or antique home makes it worse. Connecticut has a lot of housing stock that predates any drawing you could find, and centuries of additions rarely leave a clean paper trail. That is why owners of historic Connecticut homes so often discover that no existing document matches the house they live in.
When the discrepancy actually costs you
For casual conversation, none of this matters. For decisions with money attached, it matters a great deal. A renovation designed around the wrong square footage produces the wrong materials estimate. A town building department will not accept a marketing figure — it wants measured existing conditions before it reviews an addition. And a condo or HOA board reviewing your project expects drawings that reflect the real unit, which is why associations request measured board drawings rather than a number off a listing sheet.
In each of these moments, the resolution is the same: measure the building and produce a drawing. An existing conditions survey captures the property exactly as it stands and delivers a dimensioned as-built in AutoCAD DWG — with finished, above-grade, and below-grade areas separated so every reader knows precisely what they are counting.
A quick checklist before you trust a square footage number
- Ask which standard produced it — GLA, gross, or usable are three different things.
- Confirm whether finished lower levels are included or reported separately.
- Check whether the number predates any addition, dormer, or garage conversion.
- For a lease, separate rentable from usable before you sign.
- For anything you will design, file, or build, insist on a measured as-built plan, not an estimate.
Get the measured number
Marsiliana Design provides on-site measurement across Greenwich, Stamford, Westport, New Haven, and Hartford, delivering layered AutoCAD DWG as-builts — from 2 business days, depending on the size of the project. If a square footage discrepancy in Connecticut is standing between you and a renovation, a permit, or a clear-eyed purchase, we will give you one number you can actually build on. Call +1 929-767-4853 for a free quote within 2 hours.